Suitable for plank thickness range of 35 to 38mm.Retains timber scaffold planks to 48 O.D.This Coupler must only be used to join the scaffold tube with the same external diameter.ĬLICK HERE FOR □ SCAFFOLDING BOARD CLAMP LOAD CAPACITY:.Under compression loading, this Coupler is capable of taking the full capacity of the scaffold tube.Tightening bolt suits standard Scaffold Spanner.Locates on the outside diameter of scaffold tube members.Used for an end-to-end joining of scaffold tube standards.This Joint Pin must only be used to join the scaffold tube with the same internal diameter, the same wall thickness.Under tension loading, it is necessary to splice the joint with another scaffold tube and Swivel Couplers (tension load check required). Under compression loading, this Joint Pin is capable of taking the full capacity of the scaffold tube.Tightening bolt suits standard Scaffold Spanner (23mm A/F).Expands to fit the internal diameter of the scaffold tube when bolt tightened.scaffold tube standards end to end internally. It can be used to resist tension or compression loads in bracing.ĬLICK HERE FOR □ HIRA AND JSA EXPENDING JOINT PIN LOAD CAPACITY: –.WLL = 6.25 kN (637.32 KGF) against slip at tightening torque of 54 Nm.Replaceable ‘T’ bolts, nuts, and washers.Also used for tension splicing of scaffold tubes. Typically used for connecting bracing members.Each half of the Coupler is interconnected with a swivel pin.Joins a scaffold tube having an outside diameter of 48.3mm at any angle.It can be used to resist tension or compression loads.ĬLICK HERE FOR > COVID-19 SAFETY PLAN SWIVEL COUPLER LOAD CAPACITY:.The typical working load limit of 6.25kN ( 637.32 KGF) against slip at tightening torque of 54 Nm.Hot-dip galvanized finish for corrosion resistance. Robust design made from drop forged steel or Pressed Steel for durability and reliability.Replaceable ‘T’ bolts, nuts and washers.Tightening nuts suit standard Scaffold Spanner (23mm A/F).Joins two scaffold tubes having an outside diameter of 48.3mm at right angles. CLICK HERE FOR □ SAFE WORKLOAD DOUBLE COUPLER LOAD CAPACITY: – Double Coupler Fixed Clamp This manual includes basic types of scaffold couplers which join two tubes together as well as special couplers used to connect scaffold tube to other components, equipment or structures. This basic fitting that is designed to join two scaffold tubes can be used to create a diverse range of scaffolding structures or used as an accessory to prefabricate scaffolding systems. Tube-and-coupler scaffolding is defined as ‘a scaffold in which individual circular tubes serving as standards, braces or ties are joined together by means of purpose-designed couplers’. Scaffold couplers are essentially the fundamental component that is used to assemble tube-and-coupler scaffolding.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |